Walking-Working Surfaces and Fall Protection, General Industry
Walking-Working Surfaces and Fall Protection, General Industry training for employees and supervisors in warehouses, plants, dock areas, mezzanines, roof-access areas, stairways, ladders, and everyday walking-working surfaces. Covers OSHA 1910 Subpart D concepts, the four-foot general-industry trigger, fall protection systems, ladders, stairways, surface conditions, equipment-specific boundaries, retraining triggers, and employer responsibilities.
- This course covers general industry duties under 29 CFR 1910 Subpart D, including the 1910.30 requirement to train workers before exposure. If your crews work on construction sites, you need construction fall protection under 29 CFR 1926 Subpart M instead. Fall Protection Competent Person
- For ladder selection, inspection and safe use specifically, take the ladder course. Ladder Safety
- For a shorter refresher on everyday slip and trip hazards, rather than the full employer duty. Slip and Trip Awareness
Quick answer
- What is Walking-Working Surfaces and Fall Protection, General Industry?
- Walking-Working Surfaces and Fall Protection, General Industry is online compliance training documenting the requirements of 29 CFR 1910 Subpart D walking-working surfaces and fall protection awareness concepts. It costs $49, is self-paced across 4 modules, and issues a dated certificate the moment the trainee finishes.
- Who needs it?
- employers and safety managers documenting required workplace-safety and HR training for their staff.
- Is the certificate verifiable?
- Yes. Every certificate carries a unique number that anyone can check publicly at certifiedtrainingusa.com/verify without an account.
Where this standard is enforced
Citations issued under this standard, by the state the inspection took place in. Darker means more.
Most citations
Source: OSHA inspection and violation data, pulled 2026-08-23. Figures are initial penalties, which are frequently reduced on settlement.
See how often 29 CFR 1910 Subpart D walking-working surfaces and fall protection awareness concepts was cited where you operate.
Citations by state (full data)
Who actually gets cited for this
Based on the 1,586 citations under 29 CFR 1910 Subpart D walking-working surfaces and fall protection awareness concepts that we could match to an inspection record, which is 92.7% of the 1,711 we hold.
By industry
Manufacturing alone accounts for 27.5% of them.
By employer size
Citations by year
* Year still in progress, so it is not comparable with the full years beside it. Across the complete years shown, citations rose 5%.
What this course covers
Who needs this training
This course is for employers and safety managers documenting required workplace-safety and HR training for their staff. It documents the training required under 29 CFR 1910 Subpart D walking-working surfaces and fall protection awareness concepts. You can take it as an individual, or buy seats for your whole team from one account.
Instant, verifiable certificate
Your certificate issues the moment you finish, with a unique ID. Any employer or inspector can confirm it at certifiedtrainingusa.com/verify. No waiting for a card in the mail.
Get 10% off your first course
One code, one use, any course. We will also send you the occasional note when a standard changes in a way that affects training you have already bought. Nothing else.
The code applies at list price. It does not combine with team seat discounts or bundles, which are already discounted. Unsubscribe anytime.
Common questions
Can I complete this training online?
Yes. Walking-Working Surfaces and Fall Protection, General Industry is delivered entirely online and self-paced. The regulation (29 CFR 1910 Subpart D walking-working surfaces and fall protection awareness concepts) requires that the training occur and be documented, which this course satisfies; any hands-on or site-specific portion a standard also requires remains the employer's responsibility.
Do I get a certificate?
Yes. A certificate is issued the moment you complete the course. It carries a unique ID and can be verified by any employer or auditor at certifiedtrainingusa.com/verify.
How long does it take?
The course is self-paced, so you can finish in one sitting or return as your schedule allows. Most learners complete it in under two hours.
Can I train my whole team?
Yes. You can buy multiple seats and manage your team from one account. Training providers can also resell this course under their own brand.
Others usually trained alongside this
Same category, same audience. Most sites that need one of these need more than one.
Train your team
Set the headcount and the price follows. Volume discount applies automatically, and every seat gets its own redemption code to hand out.
One redemption code per seat, plus a roster showing who has finished.
5 more seats and the rate drops to $36.75.
25+ seats can be paid on invoice against a PO instead of a card.